วันอังคารที่ 5 มีนาคม พ.ศ. 2556

[rael-science] This Could Be The World’s First 3D-Printed Car‏


RedEye Produces the World's First Full-Scale Custom Chopper 3D Prototype Using FDM
RedEye, a business unit of Stratasys, unveiled the world's first full scale custom motorcycle, created entirely from using rapid prototype parts, at Autodesk University 2008. Using FDM 3D rapid…
00:02:41
เพิ่มเมื่อ 19/3/2552
ดู 24,473 ครั้ง
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Raelian Movement
for those who are not afraid of the future : http://www.rael.org   
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Contributed by Joseph Kollar
Source: http://techcrunch.com/2013/02/27/this-could-be-the-worlds-first-3d-printed-car/

This Could Be The World’s First 3D-Printed Car

Screen Shot
      2013-02-27 at 7.49.44 PM
With 3D printing on the verge of going mainstream, you can manufacture almost anything.
You can now add a 3D-printed car to that list.
The Urbee 2 is a three-wheeled hybrid assembled entirely from parts spat out of 3D printers, reportsWired. Just as Makerbot and Form 1 have changed the way we perceive manufacturing, Urbee is seeking to change the way we build cars.
Urbee is the brainchild of Jim Kor and his team at Kor Ecologic, a company solely dedicated to the future of 3D vehicle manufacturing. Their website expands upon their grand vision for the future of the automobile.
“Use the least amount of energy possible for every kilometer travelled.
Cause as little pollution as possible during manufacturing, operation, and recycling of the car.
Use materials available as close as possible to where the car is built.”
Kor’s aim is to make the cars of the future light, energy-efficient and easy to manufacture.
The manufacturing process of the Urbee takes place entirely inside RedEye, a 3D-printing facility that was also used to produce the world’s first 3D-printed motorcycle. Kor says one of the virtues of 3D printing is the added flexibility that’s impossible to produce with sheet metal. Instead of producing a multitude of parts that would be assembled later, the 3D printers can spit out a single, unibody part that makes manufacturing simpler. Kor simply uploads the models for each part into the printers, and 2,500 hours later, Kor has all the plastic parts he needs to assemble his car.
Kor has assurances that the Urbee will be perfectly safe to drive out on in the road. “We’re calling it race car safety,” Kor tells Wired. “We want the car to pass the tech inspection required at Le Mans.” And the car isn’t entirely made of plastic. The engine and the base chassis, of course, will be made of steel.
Good luck, Urbee. You may look like an oversized computer mouse, but you’ve come a long way from the days when you looked like this.


-- 
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Ethics" is simply a last-gasp attempt by deist conservatives and
orthodox dogmatics to keep humanity in ignorance and obscurantism,
through the well tried fermentation of fear, the fear of science and
new technologies.
 
There is nothing glorious about what our ancestors call history, 
it is simply a succession of mistakes, intolerances and violations.
 
On the contrary, let us embrace Science and the new technologies
unfettered, for it is these which will liberate mankind from the
myth of god, and free us from our age old fears, from disease,
death and the sweat of labour.
 
Rael
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Tell your friends that they can subscribe to this list by sending an email to:
subscribe@rael-science.org

ไม่มีความคิดเห็น:

แสดงความคิดเห็น